Good news – the monitor is working!

Yes indeed the good news is that the monitor suspected of having a power supply fault is working but with a ‘no fault found’ solution.

Four of these large CRT monitors are used in the LCP; they are Mitsubishi Electric model C3920 for display of 682 x 512 pixels.

ScreenShot032.jpg

Here are the four displays with the simulator running.

Bloodhound Sim wm.jpg

They require an RGB input with composite syncs superimposed on the green video channel. This shows the details of the non-standard video.

ScreenShot049.jpg
Pete H was doing the work in his home workshop where it took a while to set up a test rig with CHARGE cards etc to be able to drive the monitor with the non-standard RGB video used in the LCP system.

Monitor Test Rig 1 wm.jpg

This set-up provides a test card from firmware in the CHARGE system to supply suitable signals for fault finding.

CHARGE (that is Compact High-resolution Advanced Raster Graphics Equipment) was devised and developed by Ferranti design engineer Peter Don-Duncan specifically for the Argus 700. There were few applications of the product and Bloodhound is believed to be the sole remaining user.

Inspection had already shown that there was no visible indication of a heat-damaged component and when first switched on there was nothing on the screen as per the symptom in the LCP.  After checking the 6.3V supply voltage for the tube heater voltage Pete noticed the EHT was OK  …. no not because he got a belt from the supply of25kV DC but because he felt the static charge on the CRT face!

Monitor - Firmware Splash wm.jpg

There was still nothing on the screen though so Pete proceeded to check some details when  around he glanced at the screen and noticed that the test signal was displayed.  So what was the fault …  poor continuity on connector or an obscure dry joint!

The monitor white balance needs setting up and I’ll do this during the week.

So, what about the smell of burning experienced in the LCP ?  Thankfully it wasn’t the Flyback transformer in the monitor which is a great relief, so a suspect is the usual problem that initiates a nasty smell namely a RIFA filter capacitor going in a Farnell power supply.  I’m sure we have replaced all the filter capacitors in the computer rack PS’s but when we have time those in the display console and in the rack (is it S rack?)
could do with a check. A filter capacitor going U/S does not stop a PS from working.

This is a great relief as every time a monitor fails it starts me thinking about how we can  replace the Mitsubishi monitors!!!!

Advertisements

One thought on “Good news – the monitor is working!”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s