Jamming Assessment Aerial Details

With the Jamming Assessment Aerial off  it was decided to dismantle it rather than just paint it and that caused us to want to analyse how it worked; a couple of notes first:

  1. The two aerial elements (dipole and director) are on a shaft that is offset by about three degrees from the centre line so the dipoles rotate in a small circle to emulate the dipole in the missile which is seen below.12 Forebody dishwm.jpg
    Here is the aerial broken down to its invidual parts.

    08 Jamming Assess Ae Dismantledwm.jpg

    The dish itself is within the drum so the aerial assembly passes through and bolted up to the back of the dish.

  2. The  motor’s gear wheel seen here but the grease has not been dislodged from the wheel apart from where it touched a mating gear tooth. Does this mean that the aerial had not rotatated since it was last serviced, I think it does?05 Jamming Assess Ae 14wm.jpg

A couple of other observations: Corrosion is affecting the butted alloy joints, so that will be treated. The second being, the drive to the dipole shaft uses a rubber band. It was a check (six monthly?) to ensure the band hadn’t broken and I remember finding at least one that had snapped. The band on this aerial is OK burt set in a shape that again indicates it has never been running.


07 Jamming Assess Ae 7wm.jpg

06 Jamming Assess Ae 4wm.jpg
Looking at the detail of the aerial we see elements that bear some resemblance to the missile yet are very different in detail.
10 Jamming Assess Dipole 1wm.jpg
Apparently, the disk (which is flat) is called a splash plate. It seems that the distance between splash plate and dipole are critical, so perhaps the thickness of the aluminium semi-circles was selected during assembly.

The diameter of the dish is 16” (just over 40 cm) and is covered in a fibreglass case. It was noted that the displacement of the dipoles from the centre line is the radius of the metal disk in front of dipoles. If you spin the aerial the edge of the disk appears stationary at the point where the disk edge matches the centre line.

A description which looks very close to our arrangement is described here: http://armymunitions.tpub.com/mm50058/mm500580227.htm


09 Jamming Assess Ae 16wm.jpg

11 Jamming Assess Dipole 2wm.jpg

Besides the poor soldering a couple of features took us by surprise. First all elements really are electrically connected – zero ohms, even the dipole and director!  Also the size of the balance weight is quite staggering.

Here is the schematic of the aerial system, the idea of the offset aerial is shown :
Assess Ae Diagram wm.png Pete H may connect up a mains supply to see if the motor still runs. If that’s OK  he will run the motor again when reassembling and video the aerial rotating.

Mike S

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.